Ghost Immobiliser Installation
Protect your pride & joy from thieves by adding a ghost immobiliser. Our TASSA-certified system is safe from key cloning, hacking, and bypassing the vehicle immobiliser.
The system is hidden in the wiring loom of your vehicle It is inaccessible to anyone looking. It operates by creating pin code push sequences by using existing buttons on steering wheel, door cards and centre console.
No circuit cuts
It's not surprising that car owners are keen to secure the vehicle they've worked so hard to buy. However, traditional security systems like alarms and wheel locks could easily be snatched away or jumped by thieves. Ghost immobilisers are a very effective and efficient solution that operates in silence and can't be recognized by modern day thieves.
Ghost immobilisers or a hidden device is a device that communicates to the data network of your vehicle's CAN to turn off the engine. It does this without using key fobs or radio frequencies. It communicates with the vehicle's ECU by using buttons on the steering wheel, dash and door panels to create an individual pin code that you only are aware of. The code can be changed at any time and can have up to 20 digits depending on your preferences. It also comes with a secure emergency code that you can utilize in case you forget your PIN.
The ghost immobiliser is useful to prevent the relay box inside your home from transmitting the signal from your car key, which would open the doors and start your vehicle. ghost immobiliser fitting can also block sophisticated methods to steal your vehicle, including OBD port hacking. The device is small and weatherproof, so it's difficult to detect and even harder to tamper with.
The ghost immobiliser has another advantage: it can be inserted into your vehicle without leaving any permanent marks. This makes it ideal for those who intend to sell their vehicle in the future. It's also a lot faster and easier to install than a factory-fitted system.
The Autowatch Ghost, a groundbreaking technology, is a new generation device that prevents thefts from cars that are not connected to a vehicle's CAN network and using the buttons to generate a unique PIN code. This is a stealthy device that can be put in with no wires cut and doesn't require any additional key fobs. It also connects to the vehicle's original ECU and prevents thieves from gaining access by using a new key or replacing the ECU with a "relay". This system is TASSA certified and can be linked to an International Security Register, allowing owners to have peace of mind knowing their vehicles are protected against theft.
No scanning by RF
You'll want to secure your vehicle from theft when you have spent lots of money and spent a lot of time customizing it. One way to do this is to install an immobiliser. This will prevent your engine from starting unless you enter a unique pin code. You can create a 20-digit pin using the buttons on your dashboard or steering wheel. This will ensure that only you are allowed to drive your vehicle. You can also set up a valet and service mode that allows you to temporarily start your car without having to enter the PIN code. This will allow technicians to work on your vehicle, without being present. This feature is great for those who wish to cut down on time and make their lives easier.
A ghost immobiliser is a next-generation device that connects to the vehicle's CAN data network, and uses the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to blend into with the vehicle's design, as it doesn't emit any noise or LED indicators. It can be placed anywhere on your vehicle without impacting the appearance of your vehicle.
This stealthy system is approved by TASSA and can lower your insurance costs. It also has a tracking function that can track your vehicle even if it has been stolen. This is particularly useful if have a costly or rare vehicle that you've spent lots of time personalising.
Autowatch Ghost, in conjunction with the iPhone app allows you to remotely start your car if you have forgotten your PIN number or are unable get into your vehicle. This feature is great if you need to pick up the kids or go on errands, but don't want to risk having someone else drive your vehicle. This feature is helpful when you need to take your car to a mechanic for repair or service.
The Ghost is unique in that it does not transmit or detect radio frequency which means it's not detected by thieves using RF scanning and code grabbing technologies. It is also able to protect your car from key cloning and ECU swapping as well as other the most common methods used to steal cars.
No key to cloning
Ghost immobilisers are an excellent way to safeguard expensive cars and stop key cloning. They prevent your vehicle from starting until a PIN code has been entered in conjunction with the standard key fob. This makes it very difficult for thieves to take your vehicle, and may discourage them from attempting it in the first place. This is a good idea if your vehicle has been extensively modified or is a rare model.
The immobilisers are connected to the vehicle's CAN data network and are completely hidden meaning there is no visible sign of its presence in the vehicle. It is also impossible for a thief to locate the device using radio frequency scanning or code technology for grabbing. This means that a thief will have to spend more time to steal your vehicle.
To bypass the system a thief must know the unique pin code and the location of the Ghost. The pin code is exclusive to you and you can alter it as many times as you want. The pin you select is simple to remember, but mathematically difficult for anyone else to understand. The engineer will also have provided an emergency PIN code in case you forget your pin.
The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It works with all vehicles and is fully customisable to match the appearance of your vehicle. It is also extremely affordable and easy to use. The device can be moved to a different vehicle, provided that it is compatible with the new vehicle.
The immobiliser for the CAN bus is compatible with a variety of other security features. It could, for instance, detect damage to the vehicle and alert the owner. It can also shut off the engine if it senses that the vehicle has been tampered with. The system can protect your vehicle from hacking and key duplicate. It also detects vibrations and contact with the vehicle. In addition, it can notify the owner that the vehicle has been moved.
No OBD port hacking
Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, deactivate your key fob, or create new keys. This technology is an improvement over the old methods employed by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or replacing your battery.
The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that guards against hacking, key-cloning and copy-cat car theft. It does not utilize LED indicators or key-fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.
Modern thieves use diagnostics to detect cuts in the circuit on your vehicle. They can bypass immobilisers that require a large amount of wiring or are built into the wiring. The Ghost is weatherproof, does not require additional wiring, and can't be identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft systems.
A Ghost immobiliser also has a significant benefit: your vehicle can only start by someone who knows your PIN and physically has access to your vehicle. This is an advantage over traditional security systems which can be bypassed by simple modification of cables or a screwdriver.
If you forget your PIN, you can easily reset it using the emergency PIN reset function on a mobile device or computer. This is useful if you need to start your car when it's left in a garage or a valet parking service.
The Autowatch Ghost 2 has been accepted for insurance by TASSA and is able to be installed by our authorised installers. It comes with a QR fingerprint system for parts to be identified which will allow the return of stolen components should they be found, and it can be set to'service mode', which will allow the engine to start when your vehicle is in a garage, or using valet parking services however, you must enter your PIN number to leave the vehicle.